When to ship ?

We are the seller with the fastest delivery on the platform. When we receive your order, we will send your package within 12 hours.

This is 433.92MHz receiver. It is can work for 90% 433MHz remote control brands on the market.

Description

1. Models：YNG200
2. Frequency：433.92MHz 433MHz
3. Codes：Fixed / Learning / Rolling Code
4. Channels：2
5. Power supply：9V-24V AC/DC
6. Working temperature：-40℃- + 80℃

Features

1，Programming of Pulse Mode

（1）Power up the MDU module- Power LED will turn ON.
（2）Press once Bution S1 for programming Relay 1 or Button S2 for programming Relay 2. The Learn LED will light up.
（3）Press and hold a bution on the remote control until the Learn LED flashes five times.

2，Programming of Latch Mode
（1）Power up the MDU module - Power LED will tum ON.
（2）Press twice Button S1 for programming Relay 1 or Button S2 for programming Relay 2. The Learn LED will light up.
（3）Press and hold a button on the remote control until the Learn LED flashes five times.

NOTE: Each button of the remote key fob could be programmed independently.

To reset the module

- Press Button S1 or Button S2 on the control module and hold until the Learn LED lights off. By doing this, all remote controls stored in the module will be erased.

Advantages

1，Can learn Fixed and Rolling code 433.92MHz remote controls separately and simultaneously.

2，2 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously.

3，This receiver can be used in cases, when your original receiver's memory is full and can't accept any additional remote controls. By connecting this receiver to your system, you can increase the ammount of remotes up to 100. So 100 remote controls can be added to your existing system.

4，This receiver can be used in case, if you need to add more additional remote controls. The original remote controls cost is quite expensive. By connecting this receiver to your system you will save a lot of money, especially if you require 10-20 or more additional remotes.

5，If you have few different remote controls from different systems, you can replace them (substitute) with 1 4-channel remote.
It's very handy to use 1 remote instead of 3 or 4.

6，It's very easy to connect it to your control board. All you need is to connect 4 wires between receiver and control panel. If you will need any technical support - i'm always at your service !

Include

Receiver
Antenna
English instruction manual

1. Are you a manufacture ?

We are the largest garage door remote control manufacturer in China, we can produce any brand remote control for you, including original remote control.

2. I am a wholesaler, we need a remote control with a price advantage

No problem, our factory has officially settled in AliExpress, welcome to consult, we will give you the best price and best products.

3. What brands of remote controls do you still produce ?

We are the largest factory, so you can contact me directly if you need any brand remote control.

4. Can I place a large order ? Can it be customized

of course

5. Do you support drop shipping ？

Support, we have cooperated with many friends, our packaging will not reveal any information, and the chip will not print text, we only provide products and instructions for use