Package Include:
1X Build Plate (PEI+PEO)

Attention:

The plate do not come with plastic handles.But the hole position is completely compatible with the original machine.You can use the original plastic handles.

Specification:

Product: PEI and PEO sheet

Material: PEI + PEO+ steel plate

Double-sided bed: One side is a textured PEI bed, another side is a smooth diamond PEO sheet. Both sides of the spring steel build plate can be used.

Compatible 3D Printer: for FLASHFORGE Adventurer 5M/5M Pro

PEO+PEI Design: One side is a textured PEI bed which presents the frosted sticker surface with a distinctive frosted touch. Another side is a smooth diamond PEO sheet which is easy to remove and clean. The PEI bed can be resistant to 200°C for the nozzle without deformation.

Excellent Adhesion With Double-sided spraying PEI spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side.

Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.

It's easy to remove the prints when the PEI sheet cools down to around 40°C. If it's stuck, please gently bend the build plate to pop it off.

Note:

1. Due to the thickness of the sticker, please adjust the height of your Z axis

2. When it get dirty on the surface, please just wipe down with isopropyl alcohol between prints for best results.

3. Light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.

After-Sale Service:

If there are any questions, just contact us freely, a satisfactory solution will be provided within 24 hours