New fast copy type remote control product description

1.Chips could be copied

2260(all
manufacturers);2262(All manufacturers);PT2264, 5326(All
manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014,
SMC918series,527(All manufacturers);1527(All manufacturers);2240(All
manufacturers);HCS101, HCS200\HCS201(part code),HCS300\HCS301(部分代码),
Part single chip microcomputer ..........

2.Code cleaning method:

Press
the unlock button and lock button at the same time(some shells are the
up button and down button), after the LED indicator light flashes three
times, loosen any one of the buttons while the other is kept pressing,
then push the released button three times, the LED indicator will enter
into the fast flashing status. At this time all the memory data is
cleared, the cleaned remote control will not have lighting LED indicator
no matter which button you press.

3. Copy method

One
hand keeps the original remote controller, while another keeps the copy
remote control, the two remote controls should be placed as closely as
possible (the ideal situation is to put the two remote controls on the
desktop side by side with zero distance), respectively press down the
copy button, when the LED indicator light flashes quickly after three
flashes, this copy is successful, other key operating methods are the
same. Some remote control has a smaller transmitting power, so the
original remote control should be placed back to the copy remote control
to be operated. For the presence of noise, it should avoid interference
to operate, If the copy is not successful, it should recopy after
clearing code.（ Attention：Your original remote control must be able to
work and the same as our remote control frequency

4. The features of new copy remote control

The
four buttons could respectively copy four different types of chips,
That is a remote control can operate four different types of facilities.
T Faster copy data speed, not easy losing code, far distance.