K5 Series 4-in-1 Carbon Monoxide Detector Accurate detection LED Screen Portable Travel Rechargeable CO and CO2 Detector

Description

*【HIGH-PRECISION 4-IN-1 CO DETECTOR】The portable 4-in-1 carbon monoxide detector can monitor the current CO, CO2, temperature and humidity in the air in real time. Equipped with a high-precision sensor (10-year life), the detectable CO concentration range is 0~1000PPM (±10%), the CO2 concentration range is 400~5000PPM [± (50PPM + 5%)], and the temperature range is 14~122℉ (±2.7℉) / -10~50℃ (±1.5℃), humidity range is 0~95%RH (±5%RH). The data is accurate without delay and monitored in real time.

*【CO LIGHT INDICATION & CUSTOMIZED ALARM VALUE】The carbon monoxide monitor can present 3-stage light indication based on CO concentration. 0~99PPM (green flashing=safe), 100~149PPM (yellow flashing=warning), 150~1000PPM (red flashing=danger). By default, the CO monitor will sound an alarm when it reaches 150PPM. You can double-click the "function button" to customize the CO concentration alarm threshold. Note: The device must be in the "CO" interface before entering CO custom settings.

*【CO2 LIGHT INDICATION & CUSTOMIZED ALARM VALUE】The carbon dioxide monitor can present a 3-stage light indication according to the CO2 concentration. 400~699PPM (green flashing=safe), 700~1499PPM (yellow flashing=warning), 1500~5000PPM (red flashing=danger). By default, the audio alarm sounds when it reaches 1500PPM. You can double-click the "Function Button" to customize the CO2 concentration alarm threshold. Note: The device must be in the "CO₂" interface before entering the CO2 custom setting.

*【LARGE CAPACITY BATTERY & FAST CHARGING】The MINI 4-in-1 CO detector has a built-in 1000mAh lithium battery for long-lasting power. Support QC2.0, PD3.0, AFC, USB C UFP (BC1.2 DCP CDP SDP) and other common fast charging protocols charging. When the CO detector is not operated for 5 minutes, it will automatically turn on the energy saving mode (the brightness of the screen will be reduced), and you can click the "function button" to turn on the backlight.

*【OUTDOOR LANYARD & MAGNETIC SUCTION】The bottom of the CO CO2 air quality monitor can be placed freely, you can put it on the table in the living room, kitchen, bedroom, etc. And it is equipped with a special outdoor lanyard, which is convenient for you to carry and use in outdoor activities such as travel, camping, picnic, and adventure. There is also a magnetic function on the back of the CO CO2 monitor, which can be attached to any metal area such as home appliances or cars.

Bundle list

‎1 × Carbon Monoxide Detector

1 × Lanyard

1 × User Manual

1 × Type-C Cable

Kindly Remind

1.Please pay attention to distinguishing the model when placing an order:

K5C belongs to carbon dioxide detection

K5D belongs to carbon monoxide detection

K5E is a combination of CO and CO2 detection

2.pay attention to

instrument is ahigh-precision detectiondevicewith a built-in professionalprecision (NDlR)sensor. Longdistancetransportation and express delivenyoperatonsmaycauseintemal lightsourcedeviation,resultingin measurement errors.Ifyou find abnormal values.we recommendthe following two operations to restore data.Operation 1.After receiving the instrumentif abnormal data is found,Dleasecontinuouslypower on the product for more than 24 hours. Duringthis period, please ensure that it is in an outdoorventilated environment for ten minutes so that the instrumentcan perform automatic calibration.Operation 2. When theproduct is turned off, press and hold the button until thescreen displays -CAL screen shows a 200 second countdown.Atthis point, the product should be immediately placed outdoors in awell ventilated area until the countdown ends. The instrument is currentlyundergoing automatic calibration, After calibration is completed, the instrumentcan perform precise measurements (when performing operations 1 and 2, it isnecessary to maintain a ventilated outdoor environment, and operation1 needs to be kept outdoors for 10 minutes).

Product details