The EZ2209 V1.1 features two slightly differentappearances, and the products will be dispatched randomly

https://github.com/bigtreetech/BIGTREETECH-EZ-Driver

Product Introduction

EZ2130, EZ2208, EZ2209, EZ2225, EZ2226, EZ6609 are pluggable stepper motor drive modules designed by our company, with excellent performance, convenient plugging and unplugging, beautiful and practical.

Product Features

1.StealthChop can realize the mute lock of the motor and the mute when running at low speed. It is recommended to select it when the maximum speed of the motor is lower than 300RPM;

2.SpreadCycle can achieve quietness and low power consumption in a wide range of speed and torque. It is recommended to select it when the maximum speed of the motor exceeds 300RPM

3.StallGuard2: It can be used for motor stall detection when there is no limit switch (limit switch is recommended);

4.The newly developed board frame is used to match the new connector, so that customers can experience the aesthetic feeling and avoid the accident that the old driver pin hurts the hand;

5.Adopt a new type of customized heat sink to enhance the heat dissipation capacity while protecting the driver chip from external damage;

6.While adopting the environmentally friendly packaging method, the cost performance of the product is improved.

Cautions

1.Be sure to disconnect the power supply before installing the driver to prevent the driver from burning;

2.Before installing the driver, be sure to confirm the direction of the driver to prevent the driver from not working due to reverse connection;

3.Please do not plug and unplug the drive module with power on, so as not to cause damage;

4.Our company has installed the heat sink before leaving the factory. Please do not remove the heat sink easily. If there is no thermal conductive material, the heat dissipation effect will be reduced.

If you need other resources for this product, you can go to https://github.com/bigtreetech/ to find themby yourself. If you cannot find the resources thatyou need, you can contact our after-sales support.