Please Notice:

Free send 2.0mm standard, 400mm long cable, black negative on the right.

10strings of cables are 11pins (the number of each string is different, the number of cables is the number of strings + 1)

(7S-8P,13S-14P）

Please contact the seller if additional cables are required

Common Ports: B- is the total negative electrode of the battery, C-/P- is the negative electrode for charging, and is the negative electrode of the output.

Size table---common ports

15A-34MM*60MM*8MM

20A-34MM*60MM*8MM

25A-48MM*75MM*8MM

30A-48MM*75MM*8MM

35A-55MM*98MM*8MM

40A/50A-65MM*125MM*10MM

60A-64MM*145MM*10MM

80A/100A/120A-80MM*160MM*17MM

Please pay attention to the charging current of the common-port BMS. We only recommend below 10A.

Features:

【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.

【Operating Temperature】Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.

【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.

【Wiring Method】Common Ports: B- is the total negative electrode of the battery, C-/P- is the negative electrode for charging, and is the negative electrode of the output.

【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.

Package Contents:

Battery Protection Board*1

Cable*1

If you have exact requirers, you need to batch, or customize the Please Communicate with the Seller to Confirm

Please note:

Our products use the integrated IC solution.

It means that the SOC accuracy of the BMS is very high, and the voltage of each string will be collected. It must be required that the voltage, internal resistance, and capacity must be the same height during assembly, otherwise the BMS will disconnect and protect (disconnection protection function).

This product is an industrial semi-finished product, which needs to be repaired and assembled by people with professional electrical knowledge. Thank you for your understand.