Car Headlight Polishing Restoration Kit Auto Headlight Restorer Repair Set Workshop Tools 800ML Liquid Polymer Evaporator

About how to use, The method is simple, first use sandpaper to polish the headlights carefully, from coarse sandpaper to fine sandpaper 180.280.360.600.800.1200. Water can be added when sanding. Then the liquid is heated to evaporate, and the headlights can be cleaned.

Description:
The headlight restoration can effectively help you eliminate the car headlight scratches and solve yellowing, blurring, oxidation and other problems, extending the service life of the car headlight.
Features:
-Effectively eliminate the car headlight scratches and solve yellowing, blurring, oxidation and other problems.
-Restore headlight clarity, increase visibility and safety.
-Also suitable for new headlights, helping maintain and protect headlights.
-Easy to use, featuring high transparency and strong adhesion.
-Perfect for helping extend the service life of the car headlight, making the headlights brighter.
Advantages:
- Stainless steel coating liquid evaporation cup, fast heating, quick repair.
- 6 types of sandpaper, soft and waterproof.
Operation Instructions:
1. Check the damage of headlight, common problems are: crazing, yellowing, oxidation, blurring, molting, scratches and other problems.
2. Please use in a clean, dry and windless environment. Before sanding, cover the lamp with protective film, and then polish the lamp cover with sandpaper until there is no glossiness. Use 180#, 280#, 360#, 600#, 800#, 1200#, wash and cross polish with water from small to large, Polish thoroughly and do not omit the scope, then clean with water after polishing and dry with towel.
3. Add liquid into the atomizing cup (the unused coating liquid can be recovered, and a little more can be added appropriately), heat it to steam, power on the headlamp, unplug the power after atomization, exposed to the sun. Wipe the water from the headlight, and recover the coating liquid.
Supplementary instructions for use:
1. A bottle of 800ml headlight liquid can be used 3-4 times.
2. Sandpaper should be used from small specifications, and then use large specifications. You need to rinse with water every time you change the sandpaper.
3. Before use, it is necessary to put a seal around the headlights to prevent the subsequent spray from spraying to the places around the car headlights.
4. Normal cups only need to be heated for 5 minutes, but they still need to be operated according to the actual situation. You have to wait until steam appears before spraying.
5. It should be noted that after the headlights are polished, they must be rinsed, and one pair must be sprayed with steam after being thoroughly dried.
In the process of steaming, the air outlet shall not be downward to avoid liquid dropping on the lamp. If there is a drop accidentally, there is no need to panic. Repair other parts first, recycle the coating liquid, wait for about 5 minutes, and then polish and clean the dropping part again and evaporate the coating.

We sell headlamp repair fluid and headlamp repair kit. Please select the product you need. If you need a set, please select the set. If you only need headlight repair fluid, please select headlight repair fluid.

Carton set kit 2

Set 2 is a cardboard box set, which is the same as the picture.