DC 12V 24V 36V 4CH RF Wireless Remote Control Switch Radio Receiver With 1000M Long Distance Remote controller Suckers antenna

About Receiver:

Model No.: AK-C211008

1. Working voltage: DC12V-36V

2. Quiescent condition: Less than 6mA

3. Working temperature: -40 Degree +80 Degree

4. Receiver sensitivity: more than -105dBm

5. Working frequency: 433mhz

6. Output voltage: DC and AC is optional

7. Max load current: 10A

8. Size: 96*80*29mm



About Working way:

Working way changed by Learning button

Momentary: Press the Learning Button 1 times.
Relay: Press and hold -> On; Release -> Off.

Toggle: Press the Learning Button 2 times.
Relay: Press -> On; Press same button again -> Off·

Latched: Press the Learning Button 3 times.
Relay: Press -> On; Press other button -> Off.

2channel Momentary +2channel Latched: Press the Learning Button 4 times.

2channel Momentary +2channel Toggle: Press the Learning Button 5 times.

2channel Toggle +2channel Latched: Press the Learning Button 6 times.


About Learning and clearing Method:

Learning: Press learning button, the indicator flashes and OFF, loosen finger, press any button of the remote transmitter, indicator flashes three times, meaning learning succeeds.(how many times press the learning button according to the working way you need)


Clearning: Hold press learning button about 8 seconds,indicator light flashes several times and off, then press remote ,Relay did not Respond ,it means clearning code successful.


About Transmitter:

1.Buttons: 4 Buttons

2.Working Voltage:DC3V battery AA*2 not included

3.Operating frequency :433MHz

4.Remote Distance: 200-1000M

5.Operating Current: 13 mAh

6.Encode: EV1527 code