Customized Digital Dual Gauge with Alarm 52MM Water Level+Sewage Level Meter for Water/Sewage Level Sensor 0-190ohm HTG Boat Car 12V24V

NOTE: The Gauge sell single, The Sensor is sell single , if you choose gauge , the package is not included sensor , if you choose sensor , the package is not included gauge ,

2022 New 52mm Universal 2 in 1 Dual Gauge

Application: Marine Boats/Truck/Bus/Motor Home/Hot Rod/Generators

About the gauge:

The device works, with a little delay (about 20 seconds) of changes in the readings. Apparently, it is done in order not to react to the splash of water in the tank.

Feature:

- 52mm diameter Two in One Gauge show with easy installation
- Programmable Input Resistance Ohm Signal to adapt different fuel /water/temperature sensor
0-190Ω, 0-180Ω, 10-180Ω, 240-33Ω, 240-30Ω
- High Resolution View under sunshine
- Installation Diameter: 52mm (2inch)
- Reverse polarity protection and anti-fogging performance
- Working Voltage:12V/24V
- Working temperatures: - 40 to 85°C
- IP66 Waterproof

INSTALLATION GUIDE

1. Cut an Φ52mm (2-1/16") hole in the panel (II) allow a clearance of 55mm (2 3/16”). behind the panel.
2. Remove fastening ring (I), insert gauge from front. Tighten gauge (III) using fastening ring ( I)
3. Connect cables according to the diagram/label.

Package:1PCS Gauge+Manual+Cable( not include sensor)

this package is not included sensor , just the gauge

Sensor supporting Customized , if you need customized , please contact to us

Water Level Sensor:

- Resolution range: 21 mm
- Signal: 0-190ohm(can customized)
- Working volt:9-32VDC
- Operating current: ≤60mA
- Operating temperature: -30~+75℃
- Storage temperature: -40~+85℃
- Sensor Length: 100mm-600mm(can customized)

Sewage Level Sensor:

- Resolution range: 21 mm
- Signal: 0-190ohm(can customized)
- Working volt:9-32VDC
- Operating current: ≤60mA
- Operating temperature: -30~+75℃
- Storage temperature: -40~+85℃
- Sensor Length: 100mm-600mm(can customized)