Deliver to
Columbus
Free Shipping
Delivery byThursday, April 17, Order within
Shiped By: AliExpress
Fast Delivery
Security & Privacy
FREE Return
915mhz receiver Specification: Firmware Name: BETAFPV915nano RXType: FCCAntenna interface: IPEX1Maximum receive refresh rate: 200HZMinimum receive ref…
915mhz receiver Specification:
Firmware Name: BETAFPV915nano RX
Type: FCC
Antenna interface: IPEX1
Maximum receive refresh rate: 200HZ
Minimum receive refresh rate: 25Hz
Working voltage: 4-5.5V
Weight: 0.65g
Size: 20mmx11mmx3mm
Work Agreement: CRSF (Betaflight)
Frequency matching steps:
1. Please first check the software version number of the ELRS high-end head or the built-in ELRS high-frequency head module. Currently, there are only major versions 1. x.x or 2. x.x, please confirm that the high-frequency head and receiver are the same major version. (For example, the high-frequency head of software version 2.0.1 and the receiver of software version 2.30 can be used for frequency matching normally, and there is no need to upgrade the high-frequency head firmware.) However, for better compatibility, it is recommended to upgrade the high-frequency head and receiver to a completely consistent software version.
2. If the receiver is quickly powered on or off three times, the LED will start to flash twice, which means that the receiver has entered frequency matching mode. Enter high-frequency head Bind operation.
3. After successful binding, the LED on the receiver will turn on continuously and can also receive telemetry signals.
4. The meaning of the receiver LED status: it is constantly on, and the frequency pairing is successful or the communication is normal. The LED dual flashing is currently pairing, and the LED slow flashing cannot receive the transmitter signal. In this case, the LED fast flashing WiFi communication mode can be updated by connecting to a computer or mobile phone.
2.4G receiver Specification:
Firmware Name:BETAFPV2400nano RX
Type:ISM
Antenna Interface:IPEX1
Maximum Receive Refresh Rate: 500HZ
Minimum Receive Refresh Rate: 25HZ
Operating Voltage:4-5.5V
Weight: 0.65g
Size:20mm*11mm*3mm
Operating protocol:CRSF(Betaflight)
Steps for frequency matching:
1.
Please check the software version number of ELRS HF head or built-in
ELRS HF head module, which is only divided into 1.x.x or 2.x.x, please
make sure that the HF head and receiver for the same - a major version
can be, (such as software version 2.0.1 of the HF head and 2.30 of the
receiver can be used normally on the frequency, no need to upgrade the
HF head firmware), but in order to better compatibility it is
recommended that the HF head and the receiver upgraded to the exact -
consistent with the software version).
2. The LED will start to
double flash when the receiver is powered on and off three times
quickly, which means that the receiver enters the frequency pairing
mode. Enter the HF head Bind operation.
3. After successful binding,
the LED on the receiver will become normally lit. The LED on the
receiver will become always on, and at the same time, it can also
receive telemetry signals.
4. Receiver LED status meaning: always on
frequency pairing success or connection communication is normal, LED
double flash is frequency pairing, LED slow flash can not receive the
transmitter signal, LED fast flash wifi communication mode at this time
you can update the programme through the computer or mobile phone
connection.
Package Included:
1 x ELRS Receiver (send by your choice )
1 x T type receiver antenna
This product hasn't received any reviews yet. Be the first to review this product!
Shop1103530171 Store
Skyflight Global Store
Hobbymodel Factory Store
Shop1104303490 Store
