Specification

Brand

Name: HDMI Wireless Transmitter and Receiver

Resolution: 1080P60Hz

Transmitter interface HDMI, USB power

Receiver interface: HDMI, USB power supply

Function: Point to point wireless transmission

Wireless Frequency:

Adopts Realtek8731BUWiFi module, which can realise 2.4G/5.8G dual-frequency transmission

Case: ABS

Power supply: 5V 2A

Colour: black

HDMI cable length: 50cm

Delay: about 50ms

Packing: cardboard box

Packing

1* Transmitter

1* Receiver

1* Manual

HDMI Wireless Transmitter and Receiver

50 metres

The product has been paired at the factory. If the pairing fails due to improper operation or other circumstances during use, the device needs to be restored.

Re-pairing steps are as follows.

1. Please press and hold the receiver function button for more than 3 seconds, the interface pops up the prompt: Release the button to pair with EZCast TX.

Release the button to pair with EZCast TX. wait for the transmitter to enter pairing mode.

2. Press and hold the transmitter function button for more than 3 seconds, the indicator light will flash for pairing, wait for the transmitter indicator light to indicate successful connection.

Note: This device supports up to 8 transmitters paired with 1 receiver, you can purchase our packages as needed.

TX is transmitter

RX is receiver

The wireless hdmi adapter enables a wireless transmission distance of 50 metres for medium to large classroom environments. It can also be used in conference room areas for up to 20 people. Allows you to project your computer onto the projector from anywhere in a 200 square metre environment. Say goodbye to cables.