Driver Download

http://www.mmui.com.cn/data/upload/image/AQC113.zip

Note:

This network card has been tested for streaming speed at around 8.6-9G in a PCIE 4.0 X1 environment, so please consider this before purchasing.

If tested in a PCIE 3.0 X1 environment, the speed is approximately 7-8G. Please ensure you understand these specifications before making a purchase.

Attached is a screenshot of the test results in a PCIE 4.0 X1 environment:

Features

• Supports bus widths: Gen3 x1, Gen4 x1, x16
• Supports line rates up to 16.0 GT/s per lane
• Jumbo frame support up to 16 KB
• Support 10G/5G/2.5G/1000M/100M LAN speed
• 2.5W typical 10GBASE-T operating power per port: 100 meters of Cat 6A
• 1.5W typical 5GBASE-T operating power per port
• 1W typical 1GBASE-T operating power per port
• Audio Video Bridging (AVB) and PTP/1588v2
• Synchronous Ethernet (Sync-E), ITU-T standard in accordance with IEEE
• Supports Message-Signaled Interrupts (MSI and MSI-X), and legacy INTx PCIe interrupts
• Support for the Network Controller Sideband Interface (NC-SI)
• Management Component Transport Protocol(MCTP)
• IEEE 802.3an 10 Gbit/s Ethernet over unshielded twisted pair
• IEEE 802.3bz 2.5/5GBASE-T
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.1Q VLANs
• IEEE 802.3x Full Duplex and flow contro
• IEEE 802.3az - Energy Efficient Ethernet (EEE)
• Support Preboot Execution Environment (PXE)
• FCoE No
• Operation Temperature :0°C to +108°C；
• Storage Temperature：-40°C to +110°C

System Requirements:

• Microsoft® Windows®, 10/11 ,Server 2022
• RHEL/Centros7.3/7.6/7.9/8.2/8.3
• Deepin 15.11/20/20/20.6
• Ubuntu 16.04.3/18.04.5 and later releases

Package Contents

• 1 × PCIe x1 to single 10G Ethernet network Card
• 1 × User Manual
• 1 x Low Profile Bracket