• Resolution for hd 1024X600

• Built - in power amplifier circuit
• 3.5mm external audio interface

• Support raspberry pie, Banana Pi, BB Black and other mainstream development board
• Support Raspbian, Kali Linux, ubuntu and other mainstream systems, single touch plug and play without driver.

• Support win10/win8/win7 system, support five-point touch plug and play driver

Product Parameters

• Screen Type:  IPS screen

• Screen Size: 7.0 inch

• Resolution: 1024 x 600

• Touch Screen Type: Capacitive Touch Screen

• Touch IC: GT911

• Power:  MicroUSB（5V/2A）

• Power Dissipation:  100% brightness, 2.9W; Speaker version, 100% brightness, 100% volume, 4W

• Video Input Interface:  HDMI

• Audio Output Interface: 3.5mm Audio Interface

• Module Size (L x W x H): 164.90 × 102.00 × (14.25±0.2)mm

• ① HDMI Interface: Input HDMI signal, using HDMI cable connection, commonly used to connect to the computer，The maximum supported resolution is 1920x1080

• ② Touch Interface: Transfer touch signal, connect with micro USB cable, provide touch and power supply function, commonly used to connect computer

• ③ Power Interface: Connect to the power supply and use micro USB cable to connect. Only power supply function is provided

• ④ Touch Interface: Transmit touch signal, connect with micro USB cable, provide touch and power supply function, commonly used to connect Raspberry Pi

• ⑤ 3.5mm Audio Interface:  Output audio signal, connect audio output device, such as headphones

• ⑥ Backlight Adjustment Button:  Adjust the backlight brightness of the display screen. With each click, the backlight brightness increases by 10, the maximum increases to 100, and then starts from 0，Press and hold for 3 seconds to turn off the backlight

• ⑦ Cooling Fan Interface:  Connect cooling fan

• ⑧ HDMI Interface:  Input HDMI signal, connect with HDMI adapter, only used to connect to the Raspberry Pi，The maximum supported resolution is 1024x600

Product Size

Working with Raspberry Pi

Step 1. Download the Official image

1) Download Raspbian Official Image

Download URL: https://www.raspberrypi.org/downloads/raspbian/

Username: pi Password: raspberry

2) Download Ubuntu Mate Official Image

Download URL: https://ubuntu-mate.org/download/

The user name and password can be set by yourself after startup

3) Download Kail Official Image

Download URL: https://www.offensive-security.com/kali-linux-arm-images/

Username: kali (The old version is root) Password: kali(The old version is toor)

4) Download Retropie Official Image

Download URL: https://retropie.org.uk/download/

Username: pi Password: raspberry

Step 2. Brun Official Image

1) Download and install tool software（If they are already installed,this step can be ignored）

SD card format software SDCard Formatter download URL :

https://www.sdcard.org/downloads/formatter_4/

Image burning software win32diskimager download URL:

https://sourceforge.net/projects/win32diskimager/

2) Format SD card

Insert the SD card into the card reader -> Insert the card reader into the computer -> Open the SDFormatter software -> Select SD card ->

Select quick format (generally select quick format, other options can be selected according to your own needs) -> Click the Format button ->
Select "Yes" -> Click OK after formatting.

3) Brun Image

Open the win32diskimager software -> Select the image file to be burned (xxx.img ) -> Select SD card -> Click the "write" button ->

Select "Yes" -> Wait for the burning to complete (the whole process lasts about 10 minutes)

Step 3. Modify the “config.txt” configuration file

Open the “config.txt” file in the root directory of SD card on the computer, Add the following at the end of the file, save and exit.

hdmi_force_edid_audio=1

max_usb_current=1

hdmi_force_hotplug=1

config_hdmi_boost=7

hdmi_group=2

hdmi_mode=87

hdmi_drive=2

display_rotate=0

hdmi_cvt 1024 600 60 6 0 0 0

Note: for the system image of Raspberry Pi after 2021-10-30, dtoverlay = vc4-kms-v3d should also be modified to dtoverlay = vc4-fkms-v3d, otherwise it may fail to start

Step 4. Insert SD card

After the above steps are completed, pop up the SD card on the computer and insert it into the SD card slot on the back of the raspberry pi.

Step 5. Running system

Connect the HDMI interface and touch interface of the display screen to raspberry pie, connect the power supply of raspberry pie,

and start the machine to display and touch normally..

Work as HDMI touch monitor

This product can be used as the HDMI touch monitor of Windows computer, only need to connect HDMI interface and TOUCH interface, can normally display and support up to five points touch.