Skywatcher HEQ5 HEQ5 Pro EQ5 Pro EQ6R AZ-EQ6 GT Mount to PC EQMOD EQDir Hand Controller

Cable Material: PVC Outer jacket

Cable: 28AWG*4C, OD3.8

Conductor Wire: bare copper

Color: Black, Gray color available

Assebmly Black cable

Both side molded Gray cable

Chipset: Prolific PL2303GS

Type: USB to Uart TTL 5V Level

Length: 100cm, 180cm, 300cm optional, other length can be customized

Connector: Nickel plated shell, gold plated contacts

Package: PE Bag

Testing: 3 times electrical inspection, appearance inspection

Support: Windows 7 8 10 Android Mac Linux

Molding: PVC material, RoHS complaint

Application: for connecting PC to Skywatcher HEQ5 HEQ5 Pro EQ5 Pro EQ6R AZ-EQ6 GT Mount Hand Controller Port

Driver download link:

https://www.prolific.com.tw/UserFiles/files/PL23XX_Prolific_DriverInstaller_v408.zip

PL2303GS USB to Serial Bridge Controller

The PL2303GS is a low cost and high performance USB-to-Serial Bridge Controller. The PL2303GS provides a convenient small-factor solution for connecting an RS232-like full-duplex asynchronous serial device to any USB host. Prolific provides highly compatible drivers that could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.

By taking advantage of USB bulk transfer mode and large data buffers, PL2303GS is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. The flexible baud rate generator of PL2303GS also could be programmed to generate any rate between 1 bps to 12 Mbps.

* Full Compliant with USB Specification v2.0 (Full-Speed)

* On-chip USB 1.1 transceiver and 5V to 3.3V regulator

* On-chip 96MHz Clock Generator

* Supports OTPROM (One-Time Programmable ROM) for USB device descriptors. OTPROM can be programmed directly through USB port.

* Each IC has unique ID(for Serial Number)

* Full-duplex transmitter and receiver * 5, 6, 7,or 8data bits

* Odd, Even, Mark, Space, or None parity mode

* 1, 1.5,or 2 stop bits

* Parity error, frame error, and serial break detection

* Programmable baud rate from 1bps to 12Mbps

* Independent power source for serial interface

* Works with existing PC COM Port software applications

* 1024-byte bi-directional data buffers (768-byte receive/256-byte transmit)