Features:

(1)Effectively removes oxidised layers,improves solder flow,helps to solder wet parts.

(2)Made from calcium hydrogen phosphate tin powder.Fine granular, environmentally friendly, lead-free,antioxidant fast repair, restore brightness and tinning ability.

(4)Effectively removes the oxidized layer, re-tinning the soldering nozzle to achieve the purpose of regeneration and prolonging the use of the soldering iron.

Specification:

Product Name : Soldering Iron Tip Refresher

Weight: about 3g/6g/16g/30g

Size: as shown in the picture

Use steps:

(1)Heat the soldering iron tip to 300-350°C first.

(2)Let the tip of the soldering iron rub against the resurrection paste repeatedly.

(3)Clean the soldering irontip with a sponge.

(4)The soldering iron tip will be shiny and clean when it is coated with a new layer of tin.

Note:

(1)lf it doesn't work, the oxide is too thick Use a knife to scrape the oxide on the surface of the soldering iron tip Scrape when the iron is heated.

(2)Please allow a little error in the size, because it is manually measured, but it will not affect the use, I wish you a happy shopping

(3) Due to the differences between different displays, or shooting light and Angle pictures may not reflect the actual color of the item, but the difference will not be very large, thank you for your understanding!

(4)Please allow the number of small packages to be incorrect. Pictures are slightly enlarged for convenience, please be sure to note the actual size as it may be smaller than the representative photo.