Remote control connection steps

Method 1: Double-click the touch switch on the light bulb. When the light is on, you can use the remote control to control all functions of the light bulb. (Note that when turning off the lights, please use the remote control to turn it off. Because the remote control will be disconnected if you press and hold to turn off the lights. After disconnection, you need to repeat the above operations to reconnect)

Method 2: Screw the bulb directly into the powered lamp holder (the lamp holder needs to be powered on) to use the remote control function.

matters need attention

1. Please do not use a fast charger to charge the light bulb, as it may damage the bulb's chip and prevent it from charging or working properly.

2. Please use an adapter with a voltage lower than 5V2A to charge the light bulb, or connect it to a powered E27 lamp holder for charging.

3.Remove the plastic strip at the end of the remote control for it to function properly.

4. LED light bulbs are electronic products. If not used for a long time, the battery may deteriorate, affecting the bulb's lifespan or causing it not to light up. Please charge the light bulb regularly and use it.

5.Please do not use a lamp with dimming function. It is not supported

6.parts list  bulb*1，USB cable*1，hook*1，instructions*1