Yiflamefly Upgrade 1200W Smoke Machine With 9PCS RGB 3IN1 LED Colorful Spray Fogger Stage Equipment For DJ Disco Wedding Banquet

Specifications:

Color: silver and black

Material: iron

Voltage: AC 110-240V 50-60Hz

Light source: 9PCS three-in-one RGB LED lamp beads

Warm-up time: 5 minutes

Oil bottle capacity: 0.75 liters

Control method: wireless remote control for color changing and manual control

Smoke output: 1600 cubic feet per minute

Smoke spray distance: 3-4m

Remote control distance: 100m (without interference)

Power cord: about 119cm long

Scope of application:

used in dance halls, KTV, PARTY, DJ, etc. Widely used in different occasions such as stage, wedding, etc., to increase the romantic atmosphere.

Operation steps:

1. Open the machine oil bottle cap, add appropriate smoke oil.

2. Insert the power cord and receiver into the corresponding interface, turn on the machine switch and wait for the machine to heat up.

3. Heat for about 3 minutes, keep pressing the remote control to spray smoke.

4. Press on the remote control, "R" is red +spray smoke, "G" is green + spray smoke, "B" is blue + spray smoke, square is change color automatically + spray smoke.

5. The machine stops automatically in about 25 seconds, and needs to be heated about 20 seconds to work again.

Particular attention:

1. This product belongs to heatinf state during use. The high temperature of the machine is normal. Please do not touch it with your hands.

2. This product should be used at a dry place, and any liquid should be prevented form penetrating into the machine （except the oil bottle). If accidental penetration, turn off the power immediately and wait for the machine to dry before use.

3. Keep away form inflammables and explosives when using this product.

4. When the liquid in the oil bottle is about to run out, add smoke oil immediately, otherwise the machine will be damaged if you continue to work.

5. When the machine is working, do not touch the cigarette nozzle and the bottom of the machine directly with your hands to prevent scalding.

6. After the machine used, it should be packaged and stored after cooling.

7. Turn off the power of the machine when no one is present.

8. It is normal for smoke to appear during the first heating.

Packing list:

Fog machine *1

Remote control *1

Signal receiver *1

Screw *2

Bracket *1

Instructions in five languages *1